One of the most overlooked details in planning a kid’s party is access. Any information you can provide will help with the planning and set up.It’s always preferred for our staff to have access to drive onto ovals or directly to the set-up area, so equipment can be easily unloaded from the vehicle.The more details you can provide about your event the better. Information, such as grass slopes and other terrains, is useful to ensure a suitable setup.Site maps will also offer a general idea of where amusements will be set up according to power and space requirements.Access is another often overlooked detail. Our large inflatable equipment often means lifting a 200+ kilo unit to the area. It’s always preferred for staff to have access and permission to drive onto the oval or directly to the set-up area, so equipment can be unloaded from the vehicle to location, avoiding excess movement.

Inflatables and other amusements take up a lot of room when packed into a vehicle. We have experienced drivers who will arrive onsite in a ute, truck, or van to set up the hired equipment. However, seating is limited in these vehicles so the number of staff who can travel in the same vehicle is also limited.Trained staff can be provided for your event at a cost of $70 per hour, per operator. Please be aware extra staff may require a second vehicle. To add value it may be worth considering selecting more equipment to add to your package if a second vehicle is needed. If you choose this option, we are happy to work out a great price for you.We fully understand if this is not in your budget, or you plan to provide volunteers instead, which will help reduce your costs.

To make sure bump in/out works smoothly on your end, you need to make sure electricity, vehicle/site access, an onsite contact and a layout are provided and ready before our arrival. We will schedule our team to be on site and have enough time to set up the equipment to ensure it’s set up before your event is to start. However if it is not organised for them on site, they might lose time and not be able to start on time.

Yes power is required at all time to use our inflatables. Constant air is blown to inflate the rides.

All our inflatables can be used with power coming from a standard powerpoint outlet (10Amp). A Bucking bull will require 1 x 15Amp power point (we have Generators available for hire for $120 per 3 hours)

Inflatables must be set up on a flat and level surface. Depending on the ground surface, we will either set up the inflatables with pegs, sandbags or water drums.

We can set up inflatables on bitumen with sandbags or water drums for bigger units. Keep in mind pegging into the ground is always a better way to have an inflatable safely set up.

All our inflatables have a limited numbers of patrons who can be on the inflatables at the same time. You can browse our website and check out all our product specs. Our team members on site or at the time of set up will go through safety procedures with you before the event starts.

Zorb Balls are an inflatable ball about 3m in diameter, the person using them hops into the hole in the middle of the Zorb and uses arms and legs to roll the Zorb ball around (a bit like a hamster in a wheel). Bubble Soccer are smaller inflatable balls (about 1m in diameter) but the person using stands in the middle of them with their head out the top, legs out the bottom but you are strapped in and holding onto the handles on the inside of the bubble. You then run around the zone with an actual soccer ball and run into eachother, trying to score goals. It is very fun, very active and will have you laughing for ages!

Unfortunately we do not supply inflatables for Colour Runs. The paint can stain/cause damage to our inflatables and the customer will be charged with this damage.

Depending on which inflatables you hire, we require a specific space and clearance on site. All our products are listed on the website with their Specs. Please make sure an extra metre is always available around the entire unit. This extra metre takes into account the space for the blower, and the entry/exit of the inflatables.For School Events, once you have worked out how many attractions your school event needs, you’ll be able to determine the best location for the big day.School grounds such as a large oval is typically the best pick. However, you may still need to arrange permits and insurance for the setup of market stalls, amusements and other attractions. Check with your local council for more information.Public parks will also need a permit from the local council prior to the school event. Depending on the council the costs will vary but is usually between $100-$200.Setup requires a flat surface near power to operate. Sandbags or water drums can be provided if put on pavement/bitumen. However, it’s recommend grass areas where possible